Fish belly white marble

Chinese name: Fish belly white

English name: Arabescato Corchia

Origin: Italy

Color: white

Volume density: 2.72g/cm3

Compression resistance: 139Mpa

Flexural resistance: 7Mpa

Water absorption rate: 0.18%

Material description: Fish belly white is a kind of white marble mined in Italy. This stone is deeply loved by designers and owners in terms of material, pattern, and finish. It is widely used in the decoration of high-end hotels, high-end villas, and high-end leisure places. After laying, it feels like jade, elegant, as if you are in the palace of the Holy Spirit.

Advantages: Fish belly white is resistant to weathering, not easy to corrode, durable, beautiful, harmonious and natural, and is widely loved by users.

Fish belly white quality

Ideal quality:

(1) White base, the whiter the better;

(2) Fine lines, few lines, evenly distributed;

(3) No yellow lines, yellow spots, gray spots, green spots;

(4) No cracks;

(5) No gray bands.

You can refer to these points to check the quality level of the stone you purchased.

Related varieties recommended: Silk Road, Glacier Elf, Golden Silk White Jade

Scope of application: floor, wall, countertop, etc.

Maintenance of Fish Belly White

Fish Belly White marble belongs to dolomite marble, and its main component is calcium magnesium carbonate. Therefore, in daily maintenance and management, special chemical agents should be used to make the marble more transparent and clear. The general marble crystal surface agent cannot achieve the transparency, smoothness, clarity and high gloss of fish belly white. In particular, employees who have not received professional training will make the fish belly white unrecognizable, either yellowing or blackening. It is recommended that owners must choose a more professional stone maintenance company!

Before grinding, remember to do a thorough protection of the stone. Of course, you must also do a thorough protection before paving this type of stone. In addition, the curing period after the stone is paved must be sufficient for 28 days before you can do seam repair and glue repair!

Maintenance points of fish belly white

Maintenance points:

Do not use strong acid crystal powder and agents. You should choose agents that can replace magnesium oxide inside the stone to enhance the light transmittance and anti-slip properties of the stone. Make white stone such as fish belly white into a clear crystal glaze effect. You can also consider using glaze paste for maintenance!

The general property of white stone is that it is easy to be polluted and penetrated, so it is necessary to strengthen the waterproof, oil-proof and anti-fouling work of this type of stone during paving, grinding, maintenance and use! !

Daily management of fish belly white

Because white stone is more easily polluted than other stones, it is recommended that in property maintenance, timely cleaning, dust removal and daily maintenance of the stone surface should be strengthened, especially pay attention to the spillage of cola, wine stains, tea stains, carbonated beverages, toilet cleaners, 84 disinfectants and other substances! !

If similar pollution is encountered, it needs to be cleaned within 10 minutes and crystallization reagents are added. If the corrosion is shallow, it is recommended to use renovation powder for polishing (special reagents can also be used for crystallization), and then gradually polish to restore gloss and clarity; if the corrosion is deep, it needs to be renovated.

Fish belly white grinding renovation

Grinding renovation process:

1. Finished product protection, cleaning the site, and preparing the skin.

2. Apply silicone penetration protection:

3. Cutting and filling:

4. Sequential grinding:

5. Apply penetration protection again.

6. Polishing according to the rules:

Points to note:

A. To ensure the purity of the white stone on site, it is recommended to wear colorless rubber-soled shoes (more durable cloth slippers can be selected), and dust each time.

B. Dust twice, white pad bottom sealing general reagent twice, and polish dry and evenly.

C. 0# steel wool polishing agent to improve clarity 2 times.

D. Polish with 0# steel wool and add lubricating and brightening agent twice. Of course, in order to keep the stone crystal surface for a longer time, you can also choose paste crystal materials, such as JT-10 or JT-10B of Jietianmeidi, or VD Alliance's glaze 1# or Zhengyipin 100 degree series or Crystal Shield series products.

7. Repair the edges and corners, remove the protective film, and clean up the site.

8. Acceptance and withdrawal.

The above procedures are for reference only!